| Paketname | dfu-util |
| Beschreibung | Device firmware update (DFU 1.0) USB programmer |
| Archiv/Repository | Offizielles Debian Archiv squeeze (main) |
| Version | 0.1-1 |
| Sektion | electronics |
| Priorität | extra |
| Installierte Größe | 80 Byte |
| Hängt ab von | libc6 (>= 2.0), libusb-0.1-4 (>= 2:0.1.12) |
| Empfohlene Pakete | |
| Paketbetreuer | Uwe Hermann |
| Quelle | |
| Paketgröße | 14630 Byte |
| Prüfsumme MD5 | 0d7291ac28424e331598aa845d4b4b26 |
| Prüfsumme SHA1 | 266ec7f0504e0a6d14045cd304c4a8259c9c6431 |
| Prüfsumme SHA256 | 0b4859faa150351d78228886d4844b46eb2157ceb5505a06458152ffe5ac6a1a |
| Link zum Herunterladen | dfu-util_0.1-1_i386.deb |
| Ausführliche Beschreibung | dfu-util is a program that implements the host (PC) side of the USB DFU 1.0
(Universal Serial Bus Device Firmware Upgrade) protocol.
.
Note: At this point only DFU version 1.0 is supported!
.
In the OpenMoko project (for example), this program is used to communicate
with the specially enhanced bootloader u-boot, which implements the DFU
device side.
|